Photovoltaic technology duo duel: in-depth analysis of PA219 flexible series and HiPower portable folding panels

  1. Core design and structural differences

PA219 flexible solar panel

Design philosophy: high cost performance and wide application fields

PA219 is designed for curved roofs, RVs, yachts and light building structures

  • Ultra-thin flexible architecture: light weight, only 3.3 kg/m², only 35% of traditional rigid solar panels , curvature adaptability : bending radius <30cm, adaptable to complex curved surfaces
  • Military-grade compression-resistant structure: Symmetrical battery layout + high modulus composite material, passed IEC 61215 mechanical load test, can withstand 5400Pa snow load ; hail-resistant, passed IEC 61730 hail test
  • Fire safety design: Flame-retardant ETFE laminate material meets IEC 61730-2 standards , passes Class A spread and Class C combustion level tests , and adapts to roof construction fire protection regulations.

Hi Power Portable Folding Board

Design philosophy: Power supply anywhere

The 10-year power warranty is typical of the solar panel series, suitable for off-grid residential, RV, commercial vehicles, marine, outdoor camping, outdoor emergency and other off-grid application scenarios.

  • Integrated folding system: patented hinge structure enables the 440W module to be folded to a volume of only 0.15m³, equipped with integrated MC4 interface and waterproof storage bag ; Lightweight, 36% lighter than conventional lightweight folding boards
  • Modular expansion design: Versatile design, multiple modules can be connected in series, allowing you to expand energy storage capacity according to specific needs. Whether you are powering a small device or an entire off-grid system, this design can meet all your needs, using shingled welding technology to reduce resistance losses.
  • Enhanced outdoor protection: ETFE fluorine film + IP68 waterproof and sealing technology (HiPower-D series), passed the MIL-STD-810G shockproof test, and can adapt to extreme temperatures of -30°C~85°C.
  1. Core technology breakthrough

Five major innovations of PA219

  • Anti-PID technology: frameless design eliminates potential induced degradation, PID degradation rate <2% (IEC 62804 test)
  • Salt spray corrosion protection: The composite backsheet passes the IEC 61701 Level 6 salt spray test (suitable for ocean-going vessels)
  • Ammonia tolerance: The battery grid line adopts silver-aluminum composite coating, and the power attenuation in ammonia environment is less than 3% (IEC 62716 standard)
  • Anti-hidden crack design: 2.5mm elastic substrate + dynamic stress dispersion technology, power retention rate >97% after bending 10,000 times
  • Light pollution control: Anti-glare function, matte surface reflectivity <5% (traditional glass panels are about 15%)

HiPower’s Engineering Innovation

  • High power output: Single crystal 166 design with maximum 4*110W; Sunpower design with 4*120W power output, specially designed for high power portable power stations, very suitable for 1-1.25kwh portable power stations, meeting the needs of outdoor multi-load simultaneous charging
  • High protection performance: The use of polymer composite materials can effectively protect the battery cells.
  • Intelligent cooling system: Honeycomb aluminum backplane achieves 22°C temperature drop and increases output efficiency by 5%
  • Self-cleaning in rainy days: Super hydrophobic coating reduces dust adhesion by 80%
  • Intelligent identification protocol: built-in MPPT chip automatically matches mainstream power stations such as EcoFlow/Jackery
  1. Comparison of typical application scenarios

The irreplaceability of PA219

  • Building Integration:

Curved steel tile roof (suitable for curved structures with a radius > 30cm)

Conservation and renovation of historic buildings (without destroying the original roof load-bearing capacity)

Agricultural greenhouse power generation (30% transmittance customized version optional)

  • Special transport:

Electric Yacht Deck

Military shelter power supply ( military emergency: individual combat equipment, temporary power supply for disaster relief )

  • RV: Lightweight solar for mobile adventures, outdoor RV travel
  • Off-grid: Providing reliable energy to remote settings.

HiPower’s mobile energy solutions

  • Outdoor emergency system:

Disaster relief site: 4 sets of parallel connection can fully charge a 2kWh power station in 1.5 hours (40% faster than traditional ones)

Polar expedition: 85% output efficiency at -30°C

  • Outdoor camping

Suitable for outdoor travel, picnics, hiking

  • Commercial mobile power supply:

Film and TV shooting: Silent power generation to avoid recording interference

Vendor car: Mobile coffee car , with a daily power generation of 8kWh to meet the needs of commercial equipment

  • High-power portable radio

Hi-power4*110W solar charging panel is designed for high-power portable power stations, very suitable for 1-1.25kwh portable power stations, meeting the needs of outdoor multi-load simultaneous charging

  1. Key performance data

Extreme environment test results

Test items PA219 Hi power-m
85 degrees high temperature Annual decay rate: 0.55% Annual decay rate: 0.68%
Hail impact (35mm diameter) No hidden cracks (IEC61730) Slight dent on outer ETFE
Salt spray corrosion 3000 hours Power retention 98.7% The resistance at the joint increases by 2.3%
Bending fatigue test 5000 cycles attenuation 1.2% Not applicable, folding more than 2000 times is prohibited
  1. Strategic Choice Matrix

Three reasons to choose PA219

✅ Permanent installation: 10-year warranty vs. 25-year replacement cycle for traditional rooftop photovoltaics

✅ Cost-effective : suitable for a variety of application scenarios, designed for curved roofs, RVs, yachts and light building structures

✅ Invisible power generation: 3.5cm ultra-thin thickness achieves architectural aesthetic integration

HiPower’s Core Competencies

⚡ Energy mobility: 440W system can be deployed in 5 minutes, supports power generation while moving , and is designed for high-power portable power stations

⚡ Intelligent adaptation: Automatically identify 60+ brands of energy storage devices, eliminating the trouble of controller configuration

⚡High protection performance: using polymer composite materials to effectively protect the battery cells

  1. Sustainable Development

Environmental Commitment

  • PA219: Using 100% recyclable backsheet material, the production carbon footprint is 37% lower than traditional processes
  • HiPower: Packaging material contains 30% recycled ocean plastics, and is EPEAT Silver certified

Whether you need an invisible power generator that coexists with buildings (PA219) or a mobile energy bank that conquers the wilderness (HiPower), Sungold redefines the boundaries of energy with cutting-edge technology.

Related Articles